11.18 15:06

Instructions for tyre use


Tires can only be disassembled and assembled by trained professionals with special equipment.


Tires can only be disassembled and assembled by trained professionals with special equipment.
Please confirm whether the vehicle air pressure is normal when it is completely cooled. Correct tire pressure is conducive to environmental protection, safety and economy. Too high or too low tire pressure may cause accidents or tire damage.
Tyres of the same specification and model must be used on the same axle, and tyres of different sizes or structures must not be mixed.
When the rim is damaged or deformed, the tyre shall not be installed for further use.
When the tire is worn to the wear indicator, it is not allowed to continue driving, and the tire should be replaced immediately.
When the tyre cord breaks, bulges or the tyre steel wire and cord are exposed, it must be stopped immediately.
If the service life of the tire is too long (more than three years), and the tire sidewall is severely cracked due to ozone aging, it shall not be used again.
The tire surface shall not contact with oil, grease and other chemical corrosives.
The tyres shall be rotated every 5000 km or half a year.

Related News


The maintenance technician advised us to pay attention to the red and yellow spots on the tires!

The red dot on the tire is solid, and the yellow dot is hollow. As everyone said, the tire cannot achieve absolute balance in the manufacturing process.

Read more

Classification and use of solid tyres?

Wholesale solid tires in Shanghai are generally divided into bonded and non bonded solid tires. The former refers to tires whose rubber is directly vulcanized on the rim, and the latter refers to tires that are vulcanized and then fixed on the rim.

Read more

The tire industry faces a new round of reshuffle

Since late May, based on the expectation that the imbalance between supply and demand is expected to improve, Shanghai Rubber has been jogging all the way and rising.

Read more